we are trying out Kubla. 2nd day. managed to plot our existing ground using your video guides. our project has 101 houses with differing FFL's. do you have tutorials we can look at as we cant seem to make headway at all?

thank you

Hi,

I'm after a bit of help if possible, We have purchased Kubla today and I've been working on the cut and fill for a project we've just started.
I have all the existing levels set up no problem, but I was wondering is there a way to do a full proposed levels map (as you get in the surface tool) but using different areas? as I have different construction thicknesses (offsets) in various areas. At the moment I'm doing a surface for each different external surface I need to measure, but it would simplify things if I could do a full level plot then add my areas to it.
I would also like to know if there is a way to export (or find out) the cut and fill volumes in depth catagories, i.e. to fit in with SMM7 not exceeding .25m/1m/2m, 2-4m etc?

Thanks
Garion

Good afternoon All,

I’ve noticed that some of the consultants who prepare road works contracts, use a product called Bentley MXRoad and supply survey data in a GENIO.TXT format.

I was wondering if anybody had come across this format? and if you have, is there a way of entering it into Kubla Cubed?

Cheers

Tim

I have designed the existing terrain and upon hitting the save button there are several data conflicts in my lines that come up in a window.  How do I find out which ones so I can make the changes.  It gives me a list but I am having difficulting finding out which ones they are.  Also I do not want to lose my work as I have spent over an defining the elevations with outlines, points, and countour line.  Please advise.  SEE ATTACHED SCREENSHOT.

Hello,

I was searching for a software for volumetrics and I found Kubla Cubed.  Its looks easy enough which is a bonus but the available youtube videos do not provide much help (just my opinion) so therefore I am stuck.
I had my survey in a dxf file which I opened with Kubla.  I now want to calculate the volume, area, average depth and probably see the 3D representation but I cannot seem to find any actions to do that on the UI.

Any help with this?

Thank you.

Evening all,
Is it possible to have a constant gradient  from A to B, no mater how many points are used to diliniate the route. As an example we may have a start level and finished level and we would like a constant gradient between both, but also have the ability to adjust the Z level to cover construction depth?
Only a thought, as it may become useful at sometime in the future.
Kind Regards
Tim

I have been looking into the process of extracting elevation data from PDF files into CAD data for use Kubla's takeoff module.

There are a number of issues that come up immediately as PDF files are not designed to store technical meta data. So technical complications often arise during the process. It should not be attempted with the expectation of perfect results every time. 

However it is a huge time saver potentially.  I have identified the following as items we could extract : 

• Continuos Lines (Outlines, Breaks lines, Contour lines) : Perhaps the easiest element to extract from a PDF is a continous line (i.e one that is not dashed or dotted). These can be loaded into Kubla Cubed as contour lines, break lines or outlines. It is important to realise that the PDF lines contain no elevation information so the elevations will need to be corrected by adjusting the polylines Z property in a CAD program or adjusting the elevation features level in Kubla Cubed.
  
  
• Dashed Lines (Outlines, Breaks lines, Contour lines) : Dashed lines often cause problems as they usually get converted to a polyline for each dash. Converting these dash segments back into polylines in CAD is so time consuming it makes the whole process counter productive. The more advanced conversion tools can have special functionality for handling this requirement and can often extract a dashed line as single polyline.
  
  
• Crossed lines (Points): In PDF files point levels are often marked with crosses, there is no concept of a CAD 'point' in a PDF file. Kubla Cubed can extract points from crosses in CAD files so the positions of point levels can often be extracted. Again no elevation will be contained in the points extracted from crossed lines. However Kubla Cubed has the ability to extract elevations from nearby text. If text is also successfully extracted from the PDF then both position and elevation of points can be extracted.
  
  
  
• Text (Point Elevations): The CAD importer in Kubla Cubed has the ability to match points with nearby text that may contain elevation information. This means that if we can extract text from the PDF file and the crosses of points we can import points with their elevations into Kubla Cubed. A frequent problem with this is that some programs save text into PDF files as collections of lines rather than as a text entity (this is usually when a non truetype font has been used). Again some of the more advanced conversion software can try to handle this and convert the polylines representing text back into a CAD text element.
  

Currently Kubla defines excavations by total volume. Under NRM2 ( or SMM7) excavation volumes are referenced by depth.

 ie;

Excavation:  Bulk Excavation:   Not exceeding 2m deep:  20m3
                                                                   2-4m deep:  130m3

Is there a methodology to define this?

Hi All,

We've recently been looking at adding additional exports from Kubla Cubed, allowing it to work better with other software and hardware.  I'd be really interested to hear your thoughts on what formats would be most useful to you.  At the moment we have been thinking of:

1) LandXml
2) SketchUp
3) Machine Control (would be useful to know which machine control formats are most popular with Cubed Users)
4) BIMS formats (e.g. IFC)
5) PDF (we currently export images instead)

...But we'll only do some of these initially based on what is most important to users.

Leo

Hi All

After installing Kubla Cubed it's a good idea to head to Kubla Cubed to check out our tutorial videos 

https://www.youtube.com/channel/UCIoEyrD...iOZPCzbdGg

We are going to try to add a lot more tutorials and walk-throughs in 2017 so subscribe to the channel if you want to keep up to date.  Feel free to ask any questions in the comments section.

If you want to see a specific video post reply to this post with a brief description and we will add it to the list.