+- Kubla Central (https://www.forums.kublasoftware.com)
+-- Forum: Kubla Cubed (https://www.forums.kublasoftware.com/forumdisplay.php?fid=4)
+--- Forum: General Discussion (https://www.forums.kublasoftware.com/forumdisplay.php?fid=19)
+--- Thread: Cross Section with multiple surfaces (/showthread.php?tid=341)
Cross Section with multiple surfaces - ropabon - 03-24-2021
Hi:
Is there a way where I can view a Cross Section with all the surfaces lines included?
I have the following surfaces:
Existing
6" Stripping
Proposed Elevations
Proposed Special Fill
Thanks
RE: Cross Section with multiple surfaces - Ted Woods - 03-24-2021
(03-24-2021, 01:17 PM)ropabon Wrote: Hi:
Is there a way where I can view a Cross Section with all the surfaces lines included?
I have the following surfaces:
Existing
6" Stripping
Proposed Elevations
Proposed Special Fill
Thanks
Hi Ropabon
Welcome to the forums.
The only way to do this currently is by exporting the spreadsheets into Excel and then combining them there. It's a bit fiddly but will get you the results you require.
The process is described at the end of the video Kubla Cubed 2019 | Measurements - Cross Sections
You will probably be able to do it with the cross sections exported to CAD as well but that requires a CAD licence and quite a bit of CAD knowledge.
We do have plans to add a way to do this directly in the program, but currently we are working on other features.
RE: Cross Section with multiple surfaces - ropabon - 03-25-2021
(03-24-2021, 04:21 PM)Ted Woods Wrote:(03-24-2021, 01:17 PM)ropabon Wrote: Hi:
Is there a way where I can view a Cross Section with all the surfaces lines included?
I have the following surfaces:
Existing
6" Stripping
Proposed Elevations
Proposed Special Fill
Thanks
Hi Ropabon
Welcome to the forums.
The only way to do this currently is by exporting the spreadsheets into Excel and then combining them there. It's a bit fiddly but will get you the results you require.
The process is described at the end of the video Kubla Cubed 2019 | Measurements - Cross Sections
You will probably be able to do it with the cross sections exported to CAD as well but that requires a CAD licence and quite a bit of CAD knowledge.
We do have plans to add a way to do this directly in the program, but currently we are working on other features.
Hi Ted:
It worked for me. I hope you can add that option to the program in the near future.
Thanks for the help.
RE: Cross Section with multiple surfaces - JLaird - 04-23-2021
I would agree that being able to see the multiple surface lines would be a great addon. We are constantly identifying Local Lidar surfaces or designers OG, Our surveyed Original Ground, Stripping, Rock Surface, Rough grading, subtracted subgrades etc.
RE: Cross Section with multiple surfaces - DavidL - 07-24-2023
Just raising this old thread as its most relevant to my query, any chances this can be incorporated in a single view within Kubla?